Manufacturer's Recycling And Energy Information - NEC MultiSync V552 User Manual

Manufacturer's Recycling and Energy Information

NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company's top
priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly
products, and always strive to help defi ne and comply with the latest independent standards from agencies such as ISO
(International Organisation for Standardization) and TCO (Swedish Trades Union).
Disposing of your old NEC product
The aim of recycling is to gain an environmental benefi t by means of re-use, upgrading, reconditioning or reclamation of
material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely
disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures
and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.
All required information concerning the disposal of the product and country-specifi c information on recycling facilities can be
found on our following websites:
http://www.nec-display-solutions.com/greencompany/ (in Europe),
http://www.nec-display.com (in Japan) or
http://www.necdisplay.com (in USA).
Energy Saving
This monitor features an advanced energy saving capability. When a Display Power Management signal is sent to the monitor,
the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.
Energy Saving Mode (POWER SAVE)
Energy Saving Mode*
*1: without any option, with factory settings.
*2: VGA input only.
*3: Depends on destination.
For additional information visit:
http://www.necdisplay.com/ (in USA)
http://www.nec-display-solutions.com/ (in Europe)
http://www.nec-display.com/global/index.html (Global)
For Energy Saving information: [Default setting: AUTO STANDBY]
For ErP/EnergyStar requirement:
Setting: DISPLAY PROTECTION
MULTI DISPLAY
ADVANCED OPTION
Power consumption: 0.5 W or less.
Time for power management function: Approx. 10 min.
For ErP (Network standby) requirement:
Setting: DISPLAY PROTECTION
MULTI DISPLAY
ADVANCED OPTION
Power consumption: 4.0 W or less (with 1 port activating)/4.0 W or less (with all ports activating).
Time for power management function: Approx. 10 sec. (Depend on setting).
Mode
1, 3
Normal Operation* *
1, * 2 (AUTO STANDBY)
Power Off
POWER SAVE
EXTERNAL CONTROL
INPUT DETECT
POWER SAVE
EXTERNAL CONTROL
INPUT DETECT
Power consumption
Approx. 100 W (V552)
Approx. 185 W (V652)
Less than 2 W
Less than 0.5 W
Less than 0.5 W
AUTO STANDBY
CONTROL RS-232C
NONE
POWER SAVE
CONTROL RS-232C
NONE
English-44
LED colour
Green
Amber
Red
Red