Panasonic PT-DX810E Operating Instructions Manual page 88

To register the current settings to the list
1)
Press qw on the normal screen (when the
menu is not displayed).
f The sub memory registration screen is displayed if the sub
memory is not registered. Proceed to Step 3).
f A list of sub memories registered to the signal currently input is
displayed.
f When [SUB MEMORY] is selected with [PROJECTOR SETUP]
→ [FUNCTION BUTTON] on the menu, the <FUNCTION>
button can be used instead of qw .
To switch to the sub memory list
1)
Press qw on the normal screen (when the
menu is not displayed).
f A list of sub memories registered to the signal currently input is
displayed.
To delete the sub memory data
1)
Press qw on the normal screen (when the
menu is not displayed).
f The [SUB MEMORY LIST] screen is displayed.
2)
Press asqw to select the sub memory to
delete, and press the <DEFAULT> button.
f The [ENTRY SIGNAL DELETE] screen is displayed.
f To cancel the deletion, press the <MENU> button to return to
the [SUB MEMORY LIST] screen.
3)
Press the <ENTER> button.
f The selected sub memory will be deleted.
88 - ENGLISH
Chapter 4 Settings — [SIGNAL LIST] menu
2)
Press asqw to select the sub memory
number to register in [SUB MEMORY LIST].
3)
Press the <ENTER> button.
f The [SIGNAL NAME CHANGE] screen is displayed.
4)
Press asqw to select [OK], and press the
<ENTER> button.
f To rename the registered data, follow the procedure in Steps 4)
and 5) in "Renaming the registered data" ( x page 86).
2)
Press asqw to select the signal to switch in
[SUB MEMORY LIST].
3)
Press the <ENTER> button.
f This switches to the signal selected in Step 2).