Hdmi Cec Menus; One Touch Play; System Standby; System Audio Control - Toshiba DIGITAL L2456DG User Manual

By activating the Enable HDMI CEC Control feature in the HDMI CEC Control Setup menu, individual HDMI-
LINK features can then be activated.

One Touch Play

The function of HDMI CEC will automatically
power on the television that was in standby mode
and switch the television's input source to the
port connected with the audio/video equipment
by powering-on or playing from the audio/video
equipment.
NOTE: This feature is dependent on the connected
equipment and television setting.

System Standby

This feature automatically switches the connected
equipment into standby when the television goes
into standby and conversely for the television to
switch into standby when connected equipment goes
into standby. It is selected in the HDMI CEC Control
Setup menu.
NOTE: This feature is dependent on the connected
equipment and television setting.

System Audio Control

Using the Speaker Preference feature allows the
television's remote control to adjust the volume or
mute the sound of the speakers connected to the
television via an AV amplifier.
Ensure that the connected AV amplifier and HDMI
CEC equipment are selected in the input source
selection and that the Initial Speaker Setting is set
to Amplifier in the HDMI CEC Control Setup menu.
NOTE: When the AV Amplifier is switched on,
its input source changed or the volume
adjusted, the sound will be output from the
AV Amplifier's speakers even if TV speakers
has been selected. Turn the television off
then on again to output the sound from the
TV's speakers.
The full function may not work and is dependent on
the amplifier being used.

HDMI CEC Menus

This feature uses CEC (Consumer Electronics
Control) technology, and allows the control of
Toshiba HDMI CEC compatible equipment from the
television's remote control.
NOTE: Not all Toshiba products currently support
HDMI CEC.
Equipment Control
The HDMI CEC mode on the television's remote
control allows the control of connected HDMI CEC
equipment being watched. To control the HDMI CEC
input source, first select the equipment with HDMI
CEC input source selection, then switch the mode
on the remote control to HDMI CEC and press any
buttons.
The available functions are dependent on the
equipment connected. Not all the remote control
keys may be available. Please refer to the operation
manual for each piece of equipment connected.
Select HDMI CEC Device
1.
2.
3.
4.
45

HDMI CEC Control Setup

Press . A list appears on screen showing
modes and all stored external equipment.
The HDMI-CEC icon appears automatically after
detected with HDMI CEC compatible equipment.
3UHVV RU WR KLJKOLJKW WKH LQSXW VRXUFH
shown with the HDMI-CEC icon.
3UHVV  DQG WKH GHYLFH VHOHFWLRQ PHQX
appears showing all connected HDMI CEC
equipment.
3UHVV RU WR KLJKOLJKW WKH GHVLUHG HDMI
CEC equipment, and then press to select.