Table of Contents
Advertisement
3. Position the computer cover on the chassis so that the rail guides on the bottom of the computer
cover engage the rails on the chassis. Then, push the cover to the front of the computer until it snaps
into position.
Figure 56. Installing the computer cover
4. Install the screws to secure the computer cover.
5. Place the computer in an upright position.
6. If a locking device is available, use it to lock the computer. See "Locking your computer" on page 57.
7. Reconnect the external cables and power cords to the corresponding connectors on the computer.
See "Hardware locations" on page 27.
8. Update your configuration. See "Using the Setup Utility program" on page 63.
9. If a newly installed hardware component does not work normally, update the device driver. See
"Keeping your computer current" on page 54.
.
Chapter 9
Installing or replacing hardware
127
Advertisement
Table of Contents
