Genie Z-51/30 Service Manual page 403

First Edition • Second Printing
5 Have another person crank the engine with the
starter motor for 15 seconds, wait 15 seconds,
then crank the engine an additional 15 seconds
or until the pressure reaches 320 psi (22 bar).
6 Ford models: Connect the LPG hose to the
LPG tank and open the valve on the tank.
Perkins Diesel models: Connect the engine
wiring harness to the fuel solenoid.
7 Start the engine from the ground controls and
check for hydraulic leaks.
Part No. 52709 Genie Z-45/25 & Genie Z-45/25J
Section 7 • Repair Procedures
HYDRAULIC PUMPS
This page intentionally left blank.
7 - 55