Remote Access - Instar IN-9408 2K+ User Manual

7. Remote Access

The camera supports two ways to remotely access the live video from all over
the world using internet connection.
7.1. P2P Protocol
The P2P protocol provides you with a simple and fast way to connect and com-
municate with your camera, using our InstarVision app, available for all major
platforms and devices. It works with any type of internet connection (local and
public IPv4/6, mobile data like LTE, 3G, etc.) as no port forwarding is necessary.
a) Install our newest InstarVision app using the app store on your device
b) Open the app, click the "+" symbol and choose Add Camera -> New P2P
Camera
c) Open your camera´s WebUI, navigate to the menu Network -> Remote
access and scan the QR code to add your camera
7.2. DDNS Service - HTTP(S) Protocol
The DDNS service provides you with the possibility to directly access your
camera remotely via your internet router. Therefore you can use any modern
web browser, our InstarVision software/app and/or third party software for
communication via the http(s) protocol.
a) Open the WebUI and go to Network -> IP configuration. Provide each
camera with a unique HTTP (e.g. 8081, 8082,...) and HTTPS (e.g. 9081,
9082,...)
b) Access your router and set up port forwarding rules for each port
c) Open the app, click the "+" symbol and Add Camera -> New IP camera
d) Open your camera's WebUI, navigate to the menu Network -> Remote
access and scan the QR Code to add your camera. Please be aware
that the DDNS service might not work from your local network - always
test with your LTE / data connection.
Please consider that port forwarding only works if your router has a public IPv4/
IPv6 address. For detailed description to port forwarding on your router model
and DDNS service in general, please refer to:
11-EN
https://remote.instar.com
Go to https://install.instar.com