Table of Contents
Advertisement
MANUAL START UP
In case of igniter failure, you can start your grill manually .
1 . Remove the grate, drip pan and flame deflector .
2 . Clean out fire pot and place no more than 1/2 cup of pellets in the bottom . Add a small
amount of solid fuel fire starter, such as those made from sawdust and wax wood
shavings . (A paper towel, shredded cardboard, or shredded newspaper can work as
a substitute .)
Note: If you have a torch lighter, a fire starter is not needed .
3 . Light the fire starter .
4 . After the pellets are burning briskly, turn on your grill . If your fire goes out, repeat
steps 1-4 .
5 . If your fire stays lit, replace the stainless flame deflector, drip pan and cooking grate
and close the lid . Be careful not to touch the fire .
CAUTION: DO NOT USE FLAMMABLE LIQUIDS SUCH AS GASOLINE, GASOLINE-TYPE
LANTERN FUEL, KEROSENE, CHAR- COAL LIGHTER FLUID, OR SIMILAR LIQUIDS TO
START OR FRESHEN-UP THE FIRE! KEEP ALL SUCH LIQUIDS WELL AWAY FROM THE
GRILL WHILE IT IS IN USE.
15
Advertisement
Table of Contents
