Download Print this page
Valcom InformaCast VIP-9894-1-Finish-IC Quick Start Manual

Valcom InformaCast VIP-9894-1-Finish-IC Quick Start Manual

Ip handsfree call station

Advertisement

Quick Links

INTRODUCTION
The VIP-9894-IC is an InformaCast compliant
Vandal Resistant IP Handsfree Emergency Call
Station to provide communication to multiple
answer locations, i.e. emergency assistance,
general assistance, information, directions and
public accessible recorded information.
InformaCast capability is available on the first Call
button, with the additional buttons (on multi-button
models) available for SIP or Valcom protocol
communications. Pressing a Call button on the IP
emergency phone initiates a call to its programmed
destination. At the time of activation, a call status
LED begins to flash. When the call is answered
the call status LED remains "ON". When the called
party terminates the call, the LED is extinguished
and the connection is released automatically.
SPECIFICATIONS
Features:
 InformaCast, SIP, Multicast or Valcom protocol
addressable
 Power over Ethernet (PoE) 802.3af compatible
 Compatible with most modern IP Telephone
systems
 Automatic Talkback VOX operation (no Push to
Talk button needed)
 Brushed stainless steel faceplate
Vandal and Tamper Resistant
LED downlight illuminated faceplate
1, 2, 3 or 4 Call Button options
Choice of 4 finishes
IP HANDSFREE CALL STATION
InformaCast
VIP-9894-1-Finish-IC (Single Button)
VIP-9894-2-Finish-IC (Two Button)
VIP-9894-3-Finish-IC (Three Button)
VIP-9894-4-Finish-IC (Four Button)
®
Compliant
Mounting
Surface Mount
Speaker Output
100dB @ 4' on-axis
Call Buttons
Single Pole Momentary Contact
Power
PoE: 802.3af, class 3
Networking
10/100 Mbps Ethernet port
Manual or Dynamic Host
Configuration Protocol (DHCP)
IP address setup.
Environment
Suitable for Indoor/Outdoor Installations
Dimensions and Weight
14.62" H x 9.87" W x 5.07" D
(37.2 cm x 25.1 cm x 12.9 cm)
Weight: 13.5 lb. (6.1 kg)
Ordering Information
The VIP-9894 is available with 1, 2, 3, or 4 Call
Buttons and in the following enclosure finishes:
(-Y)
Safety Yellow
(-B)
Safety Blue
All models feature a brushed stainless steel
faceplate.
When ordering the VIP-9894, specify the number
of Call Buttons required and the enclosure finish as
"VIP-9894-(Buttons)-(Finish)-IC".
Examples: For a VIP-9894 with 3 Call Buttons in
Light Gray finish, the full part number is
"VIP-9894-3-G-IC". A 4 Button stainless steel
model would be "VIP-9894-4-SS-IC".
Issue 1
(-G)
Light Gray
(-SS) Stainless SteeL
947537

Advertisement

loading

Summary of Contents for Valcom InformaCast VIP-9894-1-Finish-IC

  • Page 1 Single Pole Momentary Contact InformaCast capability is available on the first Call Power button, with the additional buttons (on multi-button models) available for SIP or Valcom protocol PoE: 802.3af, class 3 communications. Pressing a Call button on the IP Networking emergency phone initiates a call to its programmed destination.
  • Page 2 These products are intended for use with a UL Listed power source marked “Class 2” or “LPS” CAUTION rated 24VDC, or 48VDC (PoE). RISK OF ELECTRIC SHOCK DO NOT OPEN PoE and all interconnected ITE are intended for intra-building. CAUTION: To reduce the risk of electric shock, Do not remove cover (or back).
  • Page 3 TECHNICAL ASSISTANCE Assistance in troubleshooting is available from the factory. Call (540) 563-2000 and press 1 for Valcom Technical Support or visit our website at www.valcom.com. Valcom, Inc. equipment is not field repairable. Valcom maintains service facilities in Roanoke, VA.

This manual is also suitable for:

Informacast vip-9894-2-finish-icInformacast vip-9894-3-finish-icInformacast vip-9894-4-finish-ic