Adjusting Your Monitor Image; Using The Direct Access Controls - Lenovo L27q-35 User Manual

Adjusting your monitor image

This section describes the control features to adjust your monitor image.

Using the direct access controls

The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
Icon Control
Exit
DDC-CI
1
Input Change
Volume Adjustment Direct access to Volume adjustment
2
Increase
Up
Brightness
3
Decrease
Down
Menu
4
Enter
Description
Exit from menu and return before menu
Press and hold for 10 seconds to enable or
disable the DDC-CI function
Switches the video input source
For increasing the value on adjustment bar
Up key function and up circle
Direct access to Brightness adjustment
For decreasing the value on adjustment bar
Down key function and down circle
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock menu/
unlock menu
Press to enter next level on main menu/
sub menu status or enter previous level on
adjustment bar
2-3
Chapter 2.