Advertisement
Gallagher 3E5260 M6000i/M12000i Energizer User Manual
ACCESSORIES
Gallagher Fence Monitor G51000
Use up to 6 Fence Monitors to turn your fence into a zoned system that will enable
you to immediately determine which fence zone is in fault.
When a zone falls below a set voltage level, an alarm is sent to the Energizer
Controller indica ng that zone is below the set alarm voltage.
Gallagher Energizer Remote and Fault Finder G50700
The Gallagher Energizer Remote and Fault Finder displays which zone(s) are in fault
and can then be used to locate the fault within that zone. Power to the fence at
the fault loca on can be turned off and on using the Remote, allowing a safe and
convenient repair.
Gallagher Alarm System G57900
Create a security zone for your property by adding an Alarm System with in-built
fence monitoring technology.
Connected to the Energizer and Controller via a daisy chain connec on, the Alarm
System has input terminals to connect to the end of a sec on of fence and a
reference earth peg, enabling that sec on of fence to be monitored for security
breeches. For example, an electric gate entrance to a farm building can be set up to
alarm when opened.
The Alarm System can drive an external siren and strobe light, or provide dry contact
relays to an alarm panel or auto dialer.
To purchase any of the accessories listed, see your local Gallagher dealer.
19
Advertisement
