LG LY330C Installation Manual page 24

(4) 15Min Auto Off
y When '15Min Auto Off' is set to 'Enable', TV will turn off if there is no signal in 15Min.
(5) Auto Sensing
y -If 'Auto Sensing' is set to 'To Set ⊙ ', the input is automatically switched when the input signal that
you set to 'ON' is received.
y If 'Auto Sensing' is set to 'Disable', the input is not switched when the input signal is received.
y If SIMPLINK is set to On, HDMI is automatically set to Disable and can not work.
y If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns to
the previous setting.
y If the several inputs are connected by enabling Auto Sensing and the automatic input switch is
performed several times, the input returns to the previous setting only for the last input and does
not repeat the operation for the rest.
y For the AV input connected using the euro scart cable, Auto Sensing does not work for the TV
input because the Auto AV function is enabled.(For other inputs, Auto Sensing works normally.)
(6) Forced DVI Audio
y When Forced DVI Audio is selected, the audio signal from the HDMI port will be transmitted
through the RGB, AV, or Audio In #1 component ports.
y The video signal will be transmitted through HDMI to be displayed on the screen in standard
quality.
(7) Screen Saver Cube
y When 'Screen Saver Cube' is set to 'No', TV will do not display LG Screen Cube.
(8) One Channel Map
y If 'One Channel Map' is 'YES', the TV will operate as below.
A. When the TV is auto-scanning, it searches both air and cable channels.
B. In 'Programme Edit' window, all channels are shown in a single list regardless of input source.
(DTV/RADIO/TV) (For satellite supported models, a Satellite input source is also included.)
C. Select the 'Auto Sort' button in the 'Programme Edit' window to sort channels sequentially.
24