Table of Contents
Advertisement
4. Select the Keystone setting and press Enter.
Note: You can also press the Keystone button on the remote control to display the Keystone
adjustment screen.
5. Select the H/V-Keystone setting and press Enter. Then press Enter again.
You see the H/V-Keystone adjustment screen:
6. Use the arrow buttons on the projector or the remote control to select between vertical and
horizontal keystone or balance correction and to adjust the image shape as necessary.
V-Keystone
H-Keystone
7. When you are finished, press Esc.
After correction, your image is slightly smaller.
Parent topic:
Image Shape
98
Advertisement
Table of Contents
