Epson V11H952020 User Manual page 195

On/Standby Status light
(power) light
Off Flashing blue Orange
Flashing blue Varies
Off Flashing blue Off
Off Flashing blue Flashing
Off Flashing blue Flashing
Off Flashing blue Orange
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Lamp light Temp light
Off
Flashing Varies
orange
Flashing
orange
Off
orange
Flashing
orange orange
Orange
195
Status and solution
Lamp or lamp cover has a problem.
• Make sure that the vents and air filter
are not clogged with dust or
obstructed by nearby objects.
• Make sure the room temperature is
not too hot.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• Make sure the lamp and lamp cover
are securely installed.
• If the problem persists, unplug the
projector and contact Epson for help.
Replace the lamp soon to avoid
damage. Do not continue using the
projector.
A fan or sensor has a problem. Turn
the projector off, unplug it, and contact
Epson for help.
Internal error. Turn off the projector,
unplug it, and contact Epson for help.
Auto iris error. Turn off the projector,
unplug it, and contact Epson for help.
Power error. Turn off the projector,
unplug it, and contact Epson for help.