Table of Contents
Advertisement
General
What is the
significance of the
camera LED?
Connectivi- ty
I am not able to access
issues
my Camera.
Setting Up
During setup on de-
vices for Android™
and iOS, I am not
able to find my
Camera during the
last step and the
setup fails.
32
The LED indicates the following status:
LED flashing Red: Your Camera is
booting up. After a voice prompt the
camera is booted up and ready for
pairing.
LED Cycling Blue/Red: Your camera is in
pairing mode.
LED Solid Blue: The camera is
paired and set up to your
account.
LED Flashing Blue: The camera is live
streaming.
LED Off - No Power to camera.
Please check if the Camera is within
Wi-Fi ® range. Please try to move the
Camera closer to the router for better
Wi-Fi ® connectivity and try again.
Please reset the Camera to setup
mode and try again. Press and hold the
PAIR button on the side of the camera
until you hear a beep and voice
prompt 'Ready for pairing'. When the
Camera LED is off, this indicates that it
is in setup mode. Now restart the
setup from your smartphone again.
Help
Advertisement
Table of Contents
