Daily Care And Maintenance - Hiboy S2 Pro User Manual

10.Daily Care and Maintenance

Cleaning and storage
If you see stains on the scooter's body, wipe them off with a damp cloth. If the stains won't scrub off, put on some toothpaste,
and brush them with a toothbrush, then wipe them off with a damp cloth.
Notes: do not clean the scooter with alcohol, gasoline, kerosene or other corrosive and volatile chemical solvents to prevent
dire damage. Do not wash the board with a high-pressure water spray. During cleaning, make sure that the scooter's turned
off, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in electric shock or other major
problems.When the scooter not in use, keep it indoors where it is dry and cool. Do not put it outdoors for a long time.
Excessive sunlight, overheating and overcooling accelerate the battery pack's lifespan．
Battery maintenance
1. Use original battery packs, use of other models or brands may bring about safety issues;
2. Do not touch the contacts. Do not dismantle or puncture the casing. Keep the contacts away from metal objects to prevent short
circuit which may result in battery damage or even injuries and deaths;
3. Use original power adapter to avoid potential damage or fire;
4. Mishandling of used batteries may do tremendous harm to the environment. To protect natural environment, please follow local
regulations to properly dispose used batteries.
5.After every use, fully charge the battery to prolong its lifespan.
Storage and Disposal
1.Please try to store the scooter in a cool and dry place between 14℉ and 104℉. In extremely humid environments the interior of the
scooter may suffer condensation or even water accumulation, which may damage the battery rapidly.Devices are not intended for
use at elevations greater than 2000 m above sea level Prolonged Exposure to UV Rays, Rain and the Elements May Damage the
Enclosure Materials, Store Indoors When Not in Use.
2. In daily use, try to avoid recharging the scooter after completely exhausting the battery. If the battery is low, charge it as soon as
possible.
3. Please charge the scooter every other month to preserve the battery.
12
If the brake is too tight, use the allen wrench to loosen the screws on the caliper, and slightly send back the brake cable to shorten
the exposed length, then tighten the screws. If the brake is too loose, loosen the screws, and slightly pull out the brake cable to
lengthen the exposed length, then tighten the screws.
If the handlebar and its stem sway during riding, use the to tighten the screws on the folding mechanism.
13