Panasonic WV-SW395APJ Operating Instructions Manual page 221

and the settings including the network settings will be initialized. Do not turn off the power of the unit
about 6 minutes after turning on the power.
:
SW395 SW395
To initialize the network settings (®page 166), turn off the power of the camera, then turn on the power
again while holding down the [INITIAL SET] switch on the unit, and keep the [INITIAL SET] switch held
down for about 5 seconds. Wait about 3 minutes after releasing the button. The camera will start up
and the settings including the network settings will be initialized. Do not turn off the power of the unit
about 3 minutes after turning on the power.
:
SC386 SC386
To initialize the network settings (®page 166), do the following. Turn off the power of the camera. Turn
on the power of the camera after setting the [INITIAL SET] button to ON, and wait about 6 minutes.
The camera will start up and all the settings including the network settings will be initialized. After
initialization, turn off the power of the camera again and set the [INITIAL SET] button to OFF. Do not
turn off the power of the camera about 6 minutes after turning on the power.
SC385 SC385 SC384 SC384
To initialize the network settings (®page 166), do the following. Turn off the power of the camera. Turn
on the power of the camera after setting the [INITIAL SET] button to ON, and wait about 3 minutes.
The camera will start up and all the settings including the network settings will be initialized. After
initialization, turn off the power of the camera again and set the [INITIAL SET] button to OFF. Do not
turn off the power of the camera about 3 minutes after turning on the power.
•
SW396 SW396 SW395 SW395
The notification function allows users to notify errors to the destinations specified in "E-mail
notification" - "Destination E-mail address" and "Panasonic alarm protocol notification" - "Destination
server address" in the [Notification] tab on the "Alarm" page when an error occurs such as having no
SD memory card inserted after rebooting or inserting a locked SD memory card. (®page 147,
page 148)
SW175 SW175 SW174W SW174W SW172 SW172
SC386 SC386 SC385 SC385 SC384 SC384
20 Maintenance of the camera [Maintenance]
:
ST165 ST165 ST162 ST162
SW175 SW175 SW172 SW172 ST165 ST165
:
ST162 ST162
Operating Instructions 221