Basic Operations; Switching Power On/Off; Adjusting The Volume; Selecting A Zone And Channel - Kenwood TK-D240V User Manual

Hide thumbs Also See for TK-D240V:

User manual (22 pages)

Service manual (65 pages)

Table of Contents

Available languages

SwITCHING POwER ON/OFF

Turn the Power switch/ Volume control clockwise to switch the

transceiver ON.

Turn the Power switch/ Volume control counterclockwise fully

to switch the transceiver OFF.

ADJUSTING THE VOLUME

Rotate the Power switch/ Volume control to adjust the volume.

Clockwise increases the volume and counterclockwise

decreases it.

SELECTING A ZONE AND CHANNEL

1 Select the desired zone using the key programmed as

[Zone Up] or [Zone Down].

•

Each zone contains a group of channels.

2 Select the desired channel using the Selector (default).

•

Each channel is programmed with settings for transmitting and

receiving.

TRANSMITTING

1 Select the desired zone and channel.

2 Press the key programmed as [Monitor] or [Squelch Off] to

check whether or not the channel is free.

•

If the channel is busy, wait until it becomes free.

3 Press the PTT switch and speak into the microphone.

Release the PTT switch to receive.

•

For best sound quality, hold the transceiver approximately

1.5 inches (3 ~ 4 cm) from your mouth.