Tv Soundconnect - Samsung HW-H760 User Manual

FUNCTIONS

TV SOUNDCONNECT

You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV
SoundConnect function.
+ Connecting a TV to the Soundbar
1. Turn on the TV and Soundbar.
•
Turn on the menu of the TV.
•
Move to Speaker Settings on "Sound" tab.
•
Set the "Add New Device" menu to "On".
2. Press the ( ) button on the main unit's front panel
or the (SOURCE) button on the remote control
to select the TV mode.
3. On the TV, a message asking whether to enable the
TV SoundConnect function. "[Samsung]
Soundbar" is displayed on the TV screen.
4. Select <Yes> to finish connecting the TV and
Soundbar by TV remote control.
● Switching the Soundbar's mode from TV to
another mode automatically terminates
TV SoundConnect.
● To connect the Soundbar to another TV, the
existing connection must be terminated.
● Terminate the connection to the existing TV,
and then press the ► button on the remote
control for 5 seconds to connect to another
TV.
Connect
● The TV SoundConnect (SoundShare) function
is supported by some Samsung TVs released
from 2012 on. Check whether your TV
supports the TV SoundConnect
(SoundShare) function before you begin.
(For further information, refer to the TV's user
manual.)
● If your Samsung TV was released before
2014, check the SoundShare setting menu.
● If the distance between the TV and Soundbar
exceeds 5 m, the connection may not be
stable or the audio may stutter. If this occurs,
relocate the TV or Soundbar so that they are
within operational range, and then
re-establish the TV SoundConnect
connection.
● TV SoundConnect Operational Ranges:
- Recommended pairing range:
within 50 cm
- Recommended operational range:
within 5 m
● The Play/Pause, Next, Prev buttons are not
operable in TV SoundConnect mode.
20