Tv Soundconnect - Samsung HW-HM60 User Manual

FUNCTIONS

TV SOUNDCONNECT

You can enjoy TV sound through your SoundStand connected to a Samsung TV that supports the TV
SoundConnect function.
▶ Connecting a TV to the SoundStand
1. Turn on the TV and SoundStand.
Turn on the menu of the TV.
●
Move to Speaker Settings on "Sound" tab.
●
Set the "Add New Device" menu to "On".
●
2. Press the ( ) button on the main unit's top panel
or the SOURCE button on the remote control to
select the TV mode.
3. On the TV, a message asking whether to enable the
TV SoundConnect function. "[Samsung]
SoundStand" is displayed on the TV screen.
4. Select <Yes> to finish connecting the TV and
SoundStand by TV remote control.
Switching the SoundStand's mode from TV
●
to another automatically terminates TV
SoundConnect.
To connect the SoundStand to another TV,
●
the existing connection must be terminated.
Terminate the connection to the existing TV,
●
then press the
control for 5 seconds to connect to another
TV.
The TV SoundConnect (SoundShare)
●
function is supported by some Samsung TVs
released from 2012 on. Check whether your
TV supports the TV
SoundConnect(SoundShare) function
before you begin. (For further information,
refer to the TV's user manual.)
If your Samsung TV is released before 2014,
●
check the SoundShare setting menu.
If the distance between the TV and
●
SoundStand exceeds 16.25 ft. (5m), the
connection may not be stable or the audio
may stutter. If this occurs, relocate the TV or
SoundStand so that they are within
operational range, and then re-establish the
TV SoundConnect connection.
Connect
button on the remote
TV SoundConnect Operational Range
●
- Recommended pairing range: within
20 inches (within 50cm)
- Recommended operational range:
within 16.25 ft. (5m)
Play/Pause, Next, Prev buttons are not
●
operable in TV SoundConnect mode.
▶ Using the Bluetooth POWER On
function
The Bluetooth POWER On function is available after
you have successfully connected the SoundStand to
a Bluetooth compatible TV using TV SoundConnect.
When the Bluetooth POWER On function is ON,
turning the connected TV on or off will turn the
SoundStand's power on and off as well.
1. Connect the TV with your SoundStand using the
TV SoundConnect function.
2. Press the Bluetooth POWER button on the
SoundStand remote. "BLUETOOTH POWER ON"
appears on the SoundStand's display.
BLUETOOTH POWER ON : The SoundStand
●
turns on and off when you turn the TV on or
off.
BLUETOOTH POWER OFF : The SoundStand
●
only turns off when you turn the TV off.
This function is supported only by some
●
Samsung TVs released from 2013 on.
16