Samsung HW-H760 User Manual page 10

Wireless audio - soundbar
Table of Contents

Advertisement

REMOTE CONTROL
If there is more than one file on the device you are playing, and you press
Press the ► button to pause playing the file temporarily.
Press the ► button again to play the selected file.
Select the STANDARD mode if you want to enjoy the original sound.
When you choose a Sound Effect mode (except STANDARD), Surround
Sound Expansion will automatically be turned OFF.
Press the #,$ button to increase or decrease the subwoofer volume.
Press and hold the WOOFER button on the remote for over 5 seconds to
Press the Surr.Sound button on the remote to add depth and
When you select SURROUND SOUND AUTO: If the sound source has
more than 2 channels, SURROUND SOUND ON turns on automatically.
If the sound source has 2 channels (stereo) or less, SURROUND SOUND
Press and hold the Surr.Sound button on the remote for over 5 seconds to
+ Installing the Batteries in the Remote Control
1. Use a suitable coin to turn
the remote control's battery
cover counterclockwise to
remove it as shown in the
figure above.
Turns the Soundbar on and off.
Adjusts the volume level of the unit.
the # button, the previous file is selected.
SOUND EFFECT
Press to select a sound effect mode.
You can control the woofer volume.
You can set it from SW -6 to SW +6.
activate SPK ADD function.
Surr.Sound (Surround Sound Expansion)
spaciousness to the sound.
OFF is selected automatically.
activate WPS function.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when
inserting the battery. Put the battery
cover on and align the '' marks side
by side as shown in the figure above.
10
POWER
VOLUME
Skip Back
Play/Pause
WOOFER
3. Use a suitable coin to turn the
remote control battery cover
clockwise as far as it will go to
fix it in place.

Advertisement

Table of Contents
loading

Table of Contents