Miele G6660SCVI Operating Instructions Manual page 78

Problem solving guide
Problem
White residue is visible
on crockery and cutlery,
clouding occurs on
glassware; film can be
wiped off.
There are rust stains on
cutlery.
78
Cause and remedy
The rinse aid dosage is set too low.
 Increase the dosage. See "Before using for the
first time, Rinse aid".
There is no salt in the salt reservoir.
 Fill the salt reservoir (see "Before using for the first
time, Dishwasher salt").
The salt reservoir cap has not been screwed on cor-
rectly.
 Replace it, making sure that it screws back on cor-
rectly.
An unsuitable combination product has been used.
 Change your detergent. Use a standard liquid, tab-
let or powder detergent.
The water softener is programmed to too low a water
hardness level.
 Programme the water softener for harder water
(see "Before using for the first time, Water
softener").
The affected items are not corrosion resistant.
 There is no remedy.
Purchase cutlery which is dishwasher-proof.
A programme was not run after dishwasher salt was
added. Traces of salt have got into the wash cycle.
 Always run the QuickPowerWash programme with
the Short programme option selected and without
any crockery in the dishwasher after adding dish-
washer salt.
The salt reservoir cap has not been screwed on cor-
rectly.
 Replace it, making sure that it screws back on cor-
rectly.