Samsung DV400GWHD Series Service Manual page 16

Part
frame front
Removal
14 _ Disassembly and Reassembly
figure
1. Disconnect the power supply to the unit.
2. Remove the Panel Control, the Main PCB and the
3. Remove 3 screws from the Frame Front.
5. Remove 3 screws.
6. Remove the Door Switch Housing.
7. Lift the Frame Front off the three tabs across the
Description
Cover Top.
When 1 screws of the top portion work because
was added newly, keep in mind.
When reassemble Door Switch to Frame Front,
be careful for insert direction.
bottom and remove.