Panasonic HC-V750 Operating Instructions Manual page 226

≥ When this unit is connected to the Remote Pan Tilt Cradle, this unit is set to Motion Picture
Recording Mode. You cannot switch this unit to Still Picture Recording Mode.
≥ We recommend that you make a test recording in advance to check if the image and sound are
recorded correctly.
≥ The sound of the Remote Pan Tilt Cradle in operation will be recorded.
≥ If you start recording after making changes to the setup of the Remote Pan Tilt Cradle, such as
switching the Remote Pan Tilt Cradle Mode or changing the location of the Remote Pan Tilt
Cradle, it may rotate and return to its home position.
≥ Once the operation starts, do not disconnect the USB cable or move the Remote Pan Tilt Cradle
and this unit until the operation is finished. This may cause a malfunction or the motion picture not
to be recorded correctly.
≥ When you press the power button or when [ECONOMY (BATT)]
(l 36) works, this unit and the Remote Pan Tilt Cradle will turn off after the Remote Pan Tilt
Cradle rotates and returns to its home position.
≥ When the Remote Pan Tilt Cradle is in operation, neither [ECONOMY (BATT)] nor [ECONOMY
(AC)] will work.
≥ The following functions will be set to [OFF]:
j Level Shot Function
j Optical Image Stabilizer
j [SHOOTING GUIDE]
≥ If you experience fatigue, a feeling of discomfort or other symptoms when playing back a scene
recorded with the Remote Pan Tilt Cradle, stop the playback.
(About [Party Scene]/[Moving Object])
≥ Still pictures cannot be recorded during Motion picture recording.
≥ Depending on recording conditions, the colour tone of the image being recorded may change or
subjects may not be recorded automatically in cases such as the following:
j The subject is too large or too small
j The background and the subject are similar in colour
j The recording location is dark
j Bright light is detected (sky, TV, lamp, etc.)
j The subject is moving too fast, or not moving
j The area being recorded is close to a window
≥ Depending on recording conditions, scenes may not be recorded as intended. In such cases, we
recommend setting the mode to [Manual].
(About [Moving Object])
≥ When recording starts, a moving subject will be detected. Before recording, point the camera at
the subject.
≥ This unit cannot track more than one subject simultaneously.
≥ Certain types of subjects, such as a fast moving subject, may not be tracked.
- 226 -
(l 36) or [ECONOMY (AC)]