Table of Contents
Advertisement
NS-BBTCD01_14-1152_MAN_V4_ENG.fm Page 12 Tuesday, October 28, 2014 8:31 AM
Selecting the audio source
To select the audio source:
•
Press the Source button one or more times until the audio source you
want appears on the LCD. You can select:
•
•
•
•
•
Selecting the sound mode
You can select a sound (equalizer) mode to automatically adjust the
sound for the type music you are playing.
To select the sound mode:
•
Press the Sound button one or more times until the sound mode you
want appears on the LCD. You can select JAZZ, POP, CLASSIC, ROCK,
or FLAT.
Using a Bluetooth device
Pairing with a Bluetooth device
To pair with a Bluetooth device:
1 On your boombox, press the Source button one or more times until
the
2 Make sure that your Bluetooth device is turned on and within 33 feet
(10 meters) of your boombox.
3 On your boombox, press the
boombox enters pairing mode, and the Bluetooth LED blinks. Your
boombox remains in pairing mode for 30 minutes or until it pairs with
a Bluetooth device.
4 On the Bluetooth device, start pairing mode, then select
NS-CBBTCD01-B. See the instructions that came with the device for
information pairing.
5 If you are asked for a password, enter 0000. When pairing is complete,
the Bluetooth LED on your boombox lights solid.
6 To disconnect from the paired Bluetooth device, press and hold the
(Bluetooth pairing) button on your boombox for three seconds. Your
boombox disconnects from the Bluetooth device and enters pairing
mode again.
12
AM—AM radio band
FM—FM radio band
CD—CD player
—Paired Bluetooth device
AUX—Device connected to the AUX jack.
indicator appears of the LCD.
www.insigniaproducts.com
CD Boombox with Bluetooth
(Bluetooth pairing) button. Your
Advertisement
Table of Contents
