Aux Input - Panasonic SC-ALL2GN Operating Instructions Manual

AUX input

You can also listen to music from an external music player through this
unit.
Preparation
≥ Connect an external device. (l 11)
1
Touch [AUX].
≥ [AUX] indicator lights up.
2
Start playback on the connected device.
∫ To select the sound input level of the external device
1
While in AUX mode, touch and hold [AUX] for at least 4 seconds.
≥ "In: 0" is blinking on the display.
2
Touch [VOL –] or [VOL +] to change the setting.
In: 0: Normal level
In: 1: High level
≥ The factory default is "In: 0".
3
Touch [DISP] to confirm the setting.
≥ To improve sound distortion when "In: 1" is selected, select "In: 0".
≥ Turn the volume of the external device down to reduce the input signal. High
level of input signal will distort the sound.
≥ For details, refer to the operating instructions of the device.
≥ When the unit is selected as the AllPlay/DLNA speakers, the audio source will
change to the network.
≥ AUX cannot be selected as the audio source when the unit is waiting for the
WPS PUSH or WPS PIN code connection.
- 35 -