Panasonic SC-ALL2 Operating Instructions

Operating Instructions <Setup>
Wireless Speaker System
SC-ALL2
Model No.
Thank you for purchasing this product. Please read these instructions
carefully before using this product, and save this manual for future use.
This manual contains quick set up information. More detailed
instructions are contained in "Operating Instructions <Full version>"
which can be downloaded at the bottom right links.
Configure with Smartphone/Tablet
3
Go to wireless Select
settings on
"ALL2
your
§This can sometimes take
smartphone
1 minute to appear.
or tablet.
Settings
Wi-Fi Settings
NOTE: If this operation does not
work correctly, please repeat it
several times.
4
Download App
Download the free
"Panasonic Music
Streaming" app
[iOS] : App Store
[Android] : Google Play
TM
1
Connect
Name your device
e.g. Kitchen, Lounge
_AJ" .
§
or whatever you would
like it to appear.
NOTE: If this page is not
automatically displayed, type
"http://172.19.42.1/" into your
internet browser URL address field.
5
Stream your music
For details on the app, refer to the site below. (These sites are in English only.)
[iOS] : http://panasonic.jp/support/global/cs/audio/app/music_streaming/ios/
[Android] : http://panasonic.jp/support/global/cs/audio/app/music_streaming/android/
2
Turn On Unit
Do not connect
the LAN cable.
Select your network.
(enter password if needed)
NOTE: If you encounter an error
message asking you to reconfigure
your router to WPA2 TM security, please
refer to your router's manual or contact
your service provider for instructions on
how to do this.
Network Reset
1 Touch and hold [NET] and [1] for
more than 4 seconds, "-- --" on
the display will start blinking.
2 Touch [NET] within 10 seconds,
the network indicator starts
blinking blue/red.
The network indicator starts blinking
in blue and red.
After approximately 1 minute, it will
blink in blue slowly.
If the blinking in blue does not start, perform a
network reset (see below - Network Reset).
Wait a few seconds and... ...you're connected!
§After a short wait, your smartphone/
tablet should be automatically
reconnected to your Wi-Fi
In case you are not reconnected
automatically, please re-select your
Wi-Fi network from the settings /
Wi-Fi settings menu on your device.
The network indicator blinks in red
for a few seconds, and then lights
up solid blue when a network
connection is established.
Further Support
For Operating Instructions <Full
version>, FAQs, video tutorials,
or further help, please visit
http://panasonic.jp/support/
global/cs/audio/ALL/index.html
(This site is in English only.)
Alternatively, scan the QR code.
§
® network.
RQT0A49-2L
F0515HA3075