Table of Contents
Advertisement
Useful Information
Problem
I cannot operate the
answering system
remotely.
The unit does not emit
the specified number of
rings.
Liquid damage
Problem
Liquid or other form of
moisture has entered the
handset/base unit.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
46
TG7861_62NZ(en)_1220_ver002.pdf
TG7861_62NZ(en)_1220_ver002.pdf
Cause/solution
R The remote access code is not set. Set the remote access code
(page 36).
R You are entering the wrong remote access code. If you have
forgotten your remote access code, enter the remote access
code setting to check your current code (page 36).
R The answering system is turned off. Turn it on (page 36).
R If the first ring is turned off, the number of rings decreases by 1
from the specified number of rings.
Cause/solution
R Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.
46
46
2012/12/20
2012/12/20
18:24:15
18:24:15
Advertisement
Table of Contents
