Advertisement
NOISE CONSIDERATION
Select an installation location that can support the weight of the air
conditioner and one that will not cause increased operating noise
and vibration.
Ensure that when installed, airflow and noise from the rear side of the
unit (outdoor) do not disturb neighbouring elements.
Obstacles placed in front of the air outlet on the rear side of the unit
(outdoor), or covers placed over it will cause excessive noise and
deterioration in performance.
TRANSFERRING
Repositioning or transfer of the air conditioner due to renovation or moving requires an additional service
charge. Please consult your dealer before moving.
5
AIR CONDITIONER OPERATION
OPERATING THE UNIT
Start operation by pressing OPERATION.
The operation will turn on and the display panel will light up.
OFF / ON
To stop the operation, press the OPERATION again.
The unit will stop operating and the display panel light will turn off.
SETTING DISPLAY TEMPERATURE
The temperature can be set between 16°C and 30°C.
Recommeded temperature: 26°C~28°C
NOTES:
TEMP
SELECTING OPERATION MODE
Press MODE to select the desired operation.
HZ series
(The indicator will light up and a "beep" sound will indicate changing setting)
AUTO mode
AUTO
Air conditioners are automatically operated according to indoor and outdoor temperatures.
COOL mode
MODE
COOL
To set room temperature to your preference of cooling comfort.
DRY
HEAT mode
To set room temperature to your preference of heating comfort.
HEAT
DRY mode
DRY mode unit operates at low fan speed to give a gentle cooling operation.
SELECTING FAN SPEED
Press FAN SPEED selection button to choose fan speed level of the fan.
(The indicator will light up and a "beep" sound will indicate changing setting)
FAN SPEED
If air conditioner automatically selects COOL or DEHUMIDIFYING mode and
the fan speed is at AUTO speed, it will operate the "Self-cleaning" function to
clear the dust on Heat exchanger,(Defer air flow for 40 seconds or intermittently operate)
AUTO
ADJUSTING HORIZONTAL AIRFLOW DIRECTION
Press AIR SWING button to select air swing direction angle.
AUTO
(The indicator will light up and a "beep" sound will indicate changing setting)
Press the upper button to adjust left and right airflow direction.
AIR SWING
Press the lower button to stop AIR SWING.
SET
POWERFUL OPERATION
To reduce / increase the temperature quickly under cool mode/heat mode:
POWERFUL
Press POWERFUL button, after powerful is selected, the operation will go on
POWERFUL
for 4 hours, after that it will shift back to previous operation mode.
QUIET
nanoeX
If you want to cancel this operation, press powerful button once more.
SETTING THE OFF TIMER
When the air conditioner is OFF:
Press the TIMER-OFF button to set the timer.
Press the same button until the preferred hour of operation is reached.
TIMER-OFF
(The TIMER indicator light will blink to await for setting)
Press TIMER SET button to complete the setting. At this time, the TIMER indicator light is steady
instead of blinking.
NOTE:
SET
it is unavailable to set ON TIMER and OFF TIMER simultaneously.
The timer figure will change according to the time remaining.
QUIET OPERATION
To reduce / increase temperature quickly :
POWERFUL
QUIET
Press QUIET button.
QUIET
nanoeX
If you want to cancel this operation, press QUIET button once more.
SETTING THE ON TIMER
When the air conditioner is ON:
Press the TIMER-ON button to set the timer.
TIMER-ON
Press the same button until the preferred hour of operation is reached.
(The TIMER indicator light will blink to await for setting)
Press TIMER SET button to complete the setting. At this time, the TIMER indicator light is steady
instead of blinking.
SET
NOTE:
it is unavailable to set ON TIMER and OFF TIMER simultaneously.
The timer figure will change according to the time remaining.
CANCEL OFF TIMER SETTING
CANCEL
Press the CANCEL button to cancel the timer setting. The TIMER indicator light will turn off.
TIMER
However the temperature remains displayed.
SLEEP
nanoeX Operation
air volume will be operated according to the remote control settings.
is restored.
Note: When nanoe
X is in action, it will produce nano-ions, so sometimes it will make a little sound.
nanoeX
TM
If you really care about this sound, please turn off this function.
Note: NanoeX can also be started in HEAT mode, and nanoeX can be started
independently when COOL/HEAT/DRY is not running.
Note: When nanoeX is started alone, the remote control display screen is shown
on the right The air volume and direction can be adjusted automatically (ON or OFF)
X function automatically starts operation.
TM
(The effect on skin and hair will vary according to the season, surrounding environment (temperature, humidity),
usage time and personal conditions.)
(It can also effectively reduce the odor (smoke and oily smoke) or bacteria attached to the curtain.
The inhibitory effects of bacteria and molds are the results of demonstration in confined spaces, not actual use of space.
In addition, the deodorizing effect will vary depending on the environment (temperature, humidity), operating time,
ozone, and fiber type. )
conditions.
Indoor temperature: about 5 ~35
(Dew point temperature: above 2 )
Relative humidity: about 30%~85%
SLEEP(Cooling mode)
This setting enables the human body to enter sleep and automatically adjust the
temperature to achieve sleep comfort and energy-efficient operation.
When the sleep button is pressed (or touch control panel sleep light on),
the air conditioner enters the sleep mode schedule. Press it again to cancel the sleep schedule.
After sleep is activated, the SLEEP LED is on, and pressing it again will cancel
the sleep mode (SLEEP LED is dim).
SLEEP mode is released when the machine is turned off.
Note: During sleep operation, in order to avoid over-cooling and over-heating, the temperature, air volume
and wind direction Will not follow the remote control settings and will be adjusted automatically.
If the user needs cannot be met, the temperature or air volume can be reset.
SLEEP
After the body enters the sleep state, the body temperature drops so in the sleep mode, the
SLEEP
air conditioner will keep running for one hour or increase by 1°C after reaching the set temperature,
so that people have a comfortable sleeping environment.
SET TEMP
SLEEP MODE
START
6
HELPFUL INFORMATION & ENERGY SAVING HINTS
HELPFUL INFORMATION
Auto Restart Control
Operation will automatically resume under the previous operation mode.
If the unit was set to TIMER mode or SLEEP mode, operation will not resume automatically.
Timer Setting
When power failure occurs, the timer setting is cancelled. Once power returns, reset timer.
ENERGY SAVING HINTS
Clean the air filter every 2 weeks. Regular cleaning of the air filter preserves efficiency.
Keeping ventilation set to close keeps cool air in and hor air out.
Avoid direct sunlight and heat.
For health reason do not overcool your room.
Your air conditioner' s cooling capacity should match your room size.
7
CARE AND MAINTENANCE
Always turn off the air conditioner and the main power supply before cleaning
the unit.
Switch off the power supply if the unit is not going to be used for a long period
of time.
Clean the cabinet, front grille with mild soap or detergent and lukewarm water.
The front intake grille can be easily removed for cleaning purposes (refer to Remove the front intake
grille procedures). Gently wash it with water and a sponge.
The filter can be easily cleaned using a vacuum cleaner. Vacuum the front of the filter and then wash the
rear with water. If it is badly spoiled, wash with a mild household detergent.
Do not clean with benzene, thinner, scouring powder or cloth soaked in caustic chemicals.
If the unit is extremely dirty, heat transfer is less effecient and the unit may not cool effectively. Contact
Shun Hing Electric Service Centre Ltd. for an annual check. (Annual check is not covered by the warranty.)
If the air filter becomes clogged with dust, the cooling capacity will drop, and 6% of the electricity used to
operate the air conditioner will be wasted.
NOTE: Do not dry the front panel or the air filter in direct sunlight.
(Exposure to direct sunlight may discolour deform the panel.)
PRE-SEASON INSPECTION
Is the discharged air cold?
After 15 minutes of operation, it is normal for the temperature difference between intake and outlet air
to be more than 8°C for cooling.
Are the air intake and outlet vanes of the indoor and outdoor side obstructed?
Are the remote control batteries weak?
RECOMMENDED INSPECTION
Usage over several seasons will reduce performance as the unit becomes dirty. A dirty unit may produce foul
odours and dust may clog the dehumidifying drainage. Seasonal inspection is recommended in addition to
regular cleaning. Consult Shun Hing Electric Service Centre Ltd.,
8
BEFORE CALLING FOR SERVICE
Check the following points before calling for repairs or service.
If the malfunction persists, please contact Shun Hing Electric Service Centre Ltd.,
1
If the unit is too noisy during
Condition
operation.
The following sounds are normal during operation:
A low humming sound indicating that the unit is operating.
A soft clicking sound when the compressor turns on and off.
A flowing sound due to circulation of the refrigerant when
the compressor is turned on.
A splashing sound indicating condensation in the condenser
coil.If you hear other noises, please consult
Shun Hing Electric Service Centre Ltd.,
2
Condition
If the unit does not operate.
The main power cord is not plugged in.
The main circuit breaker has tripped.
Remote control batteries are weak.
3
Condition
If the unit does not cool properly.
The room is too big for the unit' s capacity.
The ventilation lever is set to OPEN
The air circulation is impeded by curtains or furniture.
After 15 minutes of operation, it is normal for the temperature
difference between intake and outlet air to be more than 8°C
for cooling.
Information for Users on Collection and Disposal of Old Equipment and used Batteries
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard
these items, please contact your local authorities or dealer and ask for the
correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case
it complies with the requirement set by the Directive for the chemical involved.
NOTE:
1. The enclosure opposing the room side is splash proof (IPX4).
2. Do not install this appliance in a laundry room or other
locations where water may drip from the ceiling, etc.
3. If the supply cord is damaged or need to be replaced, it must
be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
Panasonic Corporation
Website: http://www.panasonic.com
ACXF55-30430
SLEEP MODE
OR REACH THE SET TEMP
CLOSE
4
If water drips off the rear of the
Condition
unit.
Humidity is high.
Condensed water is overflowing.
To rectify the problem, mount an optional drain
pan to the unit.
5
Condition
If water drips inside the room.
The unit is tilted inward. To rectify this, tilt the unit
slightly outward.
Mount the optional drain pan if you prefer.
The drain pan may be blocked.
6
Condition
Squeaking noise during operation,
Squeaking noise after shutting down
(This is due to the expansion or contraction of the host
due to temperature changes)
To call Shun Hing Electric Service Centre Ltd.
IMMEDIATELY Turn off the power and contact
Shun Hing Electric Service Centre Ltd.
as soon as any of the following events occur.
The circuit breaker frequently trips or the fuse blows
regularly.
If water or foreign objects have accidentally entered the
air conditioner.
If there is abnormal sound during operation.
Printed in Philippines
OFTH0810-00
Advertisement
