Bticino 8005543561447 User Manual page 45

Back
Auto Date-Time
5. Touch the icon for the parameter to set (date or time); the icons to increase or decrease the
value appear.
6. Touch to set it.
7. Touch to continue.
Now it is possible to display some information concerning the configuration of the device
Back
7
A. Display the configuration parameters.
Note: the function configurations or modification on the Classe 300X will be automatically reported
also in the DOOR ENTRY APP after the first association to a smartphone and for any subsequent
modification.
B. Display if the device has been set as apartment master or slave.
C. Display if an additional power sully is present.
D. Display the firmware version of the device.
E. Display if the Professional Studio
F. Display if the Answering machine
6. Press the End key to go to the home page, postponing the configuration to a later date.
7. Now touch to access the configuration section.
Time and date
Set automatically date and time based on network
and position
11 42
m
11 10 2013
d m y
6
5
Info
N P
00 00
Master/Slave Master
Power supply Disabled
Firmware ver. 1.1.8
Professional studio Enabled
Answering machine Enabled
Configuration
function is active.
function is active.
45
Classe 300X
Installation Manual
Next
7
End
6
A
B
C
D
E
F