What To Do If; Remedying Faults - AEG LAVAMAT 86740 User Information

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you call Customer Service to deal
with one of the faults listed here or to remedy an operating fault, the
customer service technician's visit will not be free of charge, even dur-
ing the warranty period.
• It the fault code C1 or C2 appears in the
multi display, you may be able to remedy
the fault yourself (see the fault table below).
After remedying the fault, press the button
START/PAUSE (START/PAUZE, MARCHE/PAUSE). If the fault code is
displayed again, please inform the Customer Service.
• In the case of all other displayed faults (C and number or letter),
please inform the Customer Service and state the fault code.
Problem
Washing machine does
not function.
Door cannot be closed.
Water is not entering.
(1
Error code
pears.
Possible cause
Electric plug not inserted.
Fuse of the mains installation
is not correct.
Door is not properly closed.
Button: START/PAUSE
(START/PAUZE, MARCHE /
PAUSE) has not been pressed
long enough.
Child safety feature is
switched On.
Water tap is switched Off
Filter in the socket of the in-
flow hose connection is
ap-
blocked.
Water tap is full of lime or
defective.
Instructions for use
Remedy
Insert electric plug.
Replace fuse.
Close door; Lock must en-
gage audibly .
Press START/PAUSE (START/
PAUZE, MARCHE /PAUSE)
button until the programme
starts.
Cancel child safety feature
(see section „Childsafety
feature").
Open water tap.
Close water tap. Disconnect
hose from water tap, remove
filterand clean under
running water.
Check water tap, if necessary
have it repaired.
35