Steering Wheel Controls - Jensen CM701MIR Installation & Owner's Manual

OPERATION

Steering Wheel Controls

A third-party adapter must be used in order for the CM701MIR to be compatible with
any OEM steering wheel controls.
The CM701MIR has a built-in 3.5mm SWC interface that compatible with many
popular 3rd party SWC control modules, such as PAC, METRA, and others.
The following controls are available for most vehicles.
Volume +
Volume -
Mute
Seek / Track +
Seek / Track -
Band
Mode
BT Talk
BT End Call
Note: Not all OE steering wheel functions may be supported by the CM701MIR
We recommend the PAC SWI-RC .
1. Set "Radio Select Switch". Set the SWI-RC to position 7 - "Pioneer/Other/Sony".
2. To program, use the Pioneer/Sony/Other radio function mapping order.
3. When programming the SWI-RC, if a function is not supported (or not desired),
then the function MUST be skipped as per the PAC SWI-RC instructions.
4. The SWC function MUST be programmed in the correct order per the PAC SWI-RC
radio function mapping order instructions.
18
3.5mm SWC port located on the rear of the unit, on the
MAIN POWER I/O Harness
Replace with
ATO Type fuse
Only
POWER MAXIMUM OUTPUT 500mA