Airflow Direction - Mitsubishi Electric Mr.Slim MS-CP18VA Operating Instructions Manual

● OPERATING INSTRUCTIONS ●
F
AN SPEED AND
AIRFLOW DIRECTION ADJUSTMENT
Press to select fan speed. Each press changes
fan speed in the following order:
(AUTO) (Low)
• Two short beeps are heard from the indoor unit when set to AUTO.
Press to select vertical airfl ow direction. Each
press changes airfl ow direction in the following order:
(AUTO) (1) (2)
• Two short beeps are heard from the indoor unit when set to AUTO.
Press to select horizontal airfl ow direction. Each
press changes airfl ow direction in the following order:

Airflow direction

(AUTO)
The vane is set to the most effi cient airfl ow direction. :horizontal position.
(Manual)
For efficient air conditioning, select the upper position for COOL/DRY. If the
position (4) or (5) is selected during COOL/DRY, the vane automatically
moves to the upward position after 0.5 to 1 hour to prevent any condensation
from dripping.
(Swing)
The vane moves up and down intermittently.
En-5
(Med.) (High) (Super High)
(3) (4) (5) (SWING)
(SWING)
L
ONG OPERATION
Press to start LONG operation.
• Fan speed increases and the horizontal vane moves to the position
for LONG mode.
• Air reaches to longer distance.
Press again to cancel LONG operation.
• LONG operation is cancelled when the OFF/ON, VANE, or ECONO
COOL button is pressed.
P
OWERFUL COOL OPERATION
Press during COOL mode
POWERFUL COOL operation.
Fan speed : Exclusive speed for POWERFUL mode
Horizontal vane : Set position, or downward airflow position during
AUTO setting
• Temperature cannot be set during POWERFUL COOL operation.
Press again to cancel POWERFUL COOL
operation.
• POWERFUL COOL operation also is cancelled automatically in 15
minutes, or when the OFF/ON, FAN, or ECONO COOL button is
pressed.
page 4 to start