Table of Contents
Advertisement
This page will allow you to change the Administrator password and configure the authentication settings. This window also
allows you to enable Remote Management, via the Internet.
In the Admin Password section, the user can change the login password used for this device.
The following parameters can be configured:
Password:
Verify Password:
The following parameters can be configured:
Enable Graphical Authen-
tication:
Enable Remote Manage-
ment:
Remote Admin Port:
Remote Admin Inbound
Filter:
Details:
Click on the Save Settings button to accept the changes made.
Click on the Don't Save Settings button to discard the changes made.
S
W
R
AMSUNG
IRELESS
OUTER
Enter the new login password used here.
Re-enter the new login password here.
Tick this option to enable the graphical image confirmation when the user login to the web
configuration. Example:
Tick this option to enable remote management. This option will enable the router to be
accessible from the Internet port.
Enter the remote administration port number used here. Sometimes services like an
internal webserver will occupy the port number 80. In this option the user can change the
remote administration port to 8080 for example.
Select the appropriate remote admin inbound filter behaviour here. Options to choose
from are Allow All and Deny All.
Enter the remote admin inbound filter detail description used here.
U
M
SER
ANUAL
A
DMIN
P
74
AGE
Advertisement
Table of Contents
