Table of Contents
Advertisement
Use the section to configure the internal network settings of your router. The LAN IPv6 Link-Local Address is the IPv6 Ad-
dress that you use to access the Web-based management interface. If you change the LAN IPv6 Address here, you may need
to adjust your PC's network settings to access the network again. DHCP-PD can be used to acquire a IPv6 prefix for the LAN
interface.
The following parameters can be configured:
Enable DHCP PD:
LAN IPv6 Address:
LAN IPv6 Link-Local Ad-
dress:
The following parameters can be configured:
Auto-Configuration:
Auto-Configuration Type:
Router Advertisement
Lifetime:
IPv6 Address Range
(Start):
IPv6 Address Range
(End):
IPv6 Address Lifetime:
Click on the Save Settings button to accept the changes made.
Click on the Don't Save Settings button to discard the changes made.
S
W
R
AMSUNG
IRELESS
OUTER
Select this option to enable DHCP PD.
Enter the LAN IPv6 address used here. This address must be in the '/64' subnet.
Displays the LAN IPv6 Link-Local address used here.
The user can tick this option to enable the auto-configuration feature.
The user can select the auto-configuration type used here. Options to choose from are
Stateless or Stateful (DHCPv6).
This option is only available when the auto-configuration type is set to Stateless. Enter
the router advertisement lifetime value used here.
This option is only available when the auto-configuration type is set to Stateful. Enter the
start IPv6 Address for the DHCPv6 range for your local computers.
This option is only available when the auto-configuration type is set to Stateful. Enter the
end IPv6 Address for the DHCPv6 range for your local computers.
This option is only available when the auto-configuration type is set to Stateful. Enter the
IPv6 Address Lifetime (in minutes).
U
M
SER
ANUAL
P
64
AGE
Advertisement
Table of Contents
