Epson LabelWorks LW-PX700 User Manual page 25

Creating Labels to Wrap around Cable like a Flag
This label is useful for differentiating cables because the flag
portion of the label wrapped around the cable is easy to see.
Space length
Block 1 Block 2
Text length
Separator
1. Press + .
2. Select the setting method of space length with
/ and then press
In this example, we will select "Length".
Dia: Sets the length by cable diameter.
Length: Sets the length by space length.
3. Enter the space length and then press
Setting range: 0.25 to 30 cm
4. Enter the text length and then press
Setting range: 0.25 to 30cm
5. Select the type of separator with
press .
In this example, we will select "Line".
6. Select the orientation with
.
.
7. Enter the text of block 1.
8. Enter the text of block 2.
.
9. Press
/ and then
Creating Special Labels
+
/
.
In this example, we will select "Hori.2".
Hori.1
Hori.2
Vert.1
Vert.2
.
Top
Safety Instructions
Specifications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
and then press
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
25