Uniq UC-680CL User Manual page 8

3.4 Momentary Switch (UP/Down Switch)
Position Functional Select (NS)
No.
0 Normal
1 Gain Adjustment
2 Reference Adjustment
3 Factory Page
4 User Page 1
5 User Page 2
6 User Page 3
7 User Page 4
8 Normal speed/Double speed
9 Reserved
A Reserved
B Reserved
C Reserved
D Reserved
E Reserved
F Reserved
Camera settings can be saved into four different user pages. Once the user page is saved and set
between shutter speeds 4 and 7, it will be activated as long as the camera is powered ON. User
Page works in both rear plate control and RS232C communication selections.
3.5 Gain Control (AGC/MGC)
Note: This gain potentiometer only applies to cameras without Up/Down switch
on rear plate.
Manual gain control (MGC)
MGC is standard factory setting on this camera. The manual gain control can be adjusted from 4 dB
to 36 dB. Adjusting the gain potentiometer located on rear panel will change the gain value.
Automatic gain control (AGC):
AGC is not available and it is not recommended to use. Contact UNIQ for further details.
N/A
Move up or down to adjust gain
Move up or down to adjust reference
Move up or down to recall factory page
Up: Recall; Down: Save
Up: Recall; Down: Save
Up: Recall; Down: Save
Up: Recall; Down: Save
Up: Normal speed; Down: Double speed (N/A)
Figure 5. Up/Down Switch
Figure 6. Gain potentiometer
7
Up/Down Switch