READ ALL INSTRUCTIONS BEFORE - A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored. USING THIS HEATER - Do not use this heater in an RV, boat or during any application IMPORTANT SAFETY INSTRUCTIONS where battery power is converted to AC power.
Page 5
- Extreme caution is required at all times a heater is in operation. - Check your heater cord and plug connections. A loose fitting outlet Always unplug heater when not in use. Vornado does not can cause the plug to overheat or cause a fire. Be sure plug fits tight recommend unattended and unsupervised use of this heater.
Page 6
Vornado Consumer Service. Changes or modifications to this unit not expressly approved by the party SERVICING WARNING—To reduce risk of fire, electrical shock responsible for compliance could void the user’s authority to operate...
SAFETY FEATURES METAL CONSTRUCTION Forged from steel to be fire-resistant, yet cool to the touch. AUTOMATIC SAFETY SHUT-OFF SYSTEM If airflow becomes blocked, FINGER-FRIENDLY DESIGN power to heater is shut off to Resists curious fingers. prevent overheating. GROUNDED HEAVY-DUTY POWER CORD Adds durability and a more-secure wall connection.
CONTROLS THERMOSTAT -/+ MODE POWER ON/OFF High Heat (1500 watts) Low Heat (750 watts) or Fan Only TIMER POWER INDICATOR LIGHT This heater has a dual display feature and both displays are Red light illuminates to synced. One display is integrated indicate the heater is on.
HOW TO USE Before use, check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact Vornado Air LLC at 1-800-234-0604. 1. Use integrated handle on top of heater for one-hour intervals, up to 12 hours.
REMOTE CONTROL Screwdriver required. Your VMH500 heater remote includes (1) coin-style CR2032 battery. Battery comes pre-installed. Remove battery pull tab before first use. The È remote is located inside the EPS Styrofoam surrounding the front and back of the heater. Look for the REMOTE ( ) sticker affixed to the remote polybag inside the EPS Styrofoam.
Because your heater moves a substantial amount of air, it will need regular cleaning. Cleaning the outside of the heater is recommended on a weekly basis. If service is required, return your heater to Vornado. See WARRANTY for instructions. 1. Unplug heater before cleaning.
During the off-season or after extended periods of non-use, you may choose to store your heater. To ensure long life of the product, it is Your Vornado Heater has a multilevel safety shut-off system designed recommended to store your heater by following these instructions: to prevent overheating.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE AND SOLUTION Unit fails to power on. Unit is not plugged in. Plug power cord into electrical outlet. Household circuit breaker / ground fault circuit interrupter has tripped or blown fuse. Reset circuit breaker / ground fault circuit interrupter, or replace fuse. See IMPORTANT INSTRUCTIONS. Unit has overheated.
Any unauthorized product the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost. modification, repair by unauthorized repair center or use of non-approved replacement...