Epson LabelWorks PX User Manual page 21

Creating Labels for Block-66
You can create labels for Block-66 so that large numbers of
connectors can easily be identified.
Separator
Blocks length
Blocks number
1. Press + .
2. Select the length type with
.
In this example, we will select "Blocks".
Blocks: Sets the length by block length.
Label: Sets the length by label length.
3. Enter the blocks length and then press
Setting range: 0.25 to 30 cm
4. Enter the blocks number and then press
In this example, we will enter "4".
Setting range: 1 to 50
5. Select the type of separator with
press .
In this example, we will select "Line".
+
6. Select the orientation with
/ and then press
.
7. Enter the text.
.
8. Press
/ and then
Creating Special Labels
/
.
In this example, we will select "Hori.".
Hori.
Vert.1
Vert.2
You can create labels with sequence numbers.
For details, "Creating Labels with Block Sequence
Numbers Assigned"
.
Top
Safety Instructions
Specifications
Troubleshooting
Part Names and
Functions
Start Here
and then press
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
21