Epson LabelWorks PX User Manual page 20

Creating Special Labels
Creating Labels for Patch Panel
You can create the optimal labels for your patch panel by
setting the label length and number of blocks.
Separator
Blocks length
Blocks number
1. Press .
2. Select the length type with
.
In this example, we will select "Blocks".
Blocks: Sets the length by block length.
Label: Sets the length by label length.
3. Enter the blocks length and then press
Setting range: 0.25 to 30 cm
4. Enter the blocks number and then press
In this example, we will enter "3".
Setting range: 1 to 50
5. Select the type of separator with
press .
In this example, we will select "Line".
6. Select the orientation with
/ and then press
.
7. Enter the text.
.
8. Press
/ and then
/
.
In this example, we will select "Hori.".
Hori.
Vert.1
Vert.2
You can create labels with sequence numbers.
For details, "Creating Labels with Block Sequence
Numbers Assigned"
.
Top
Safety Instructions
Specifications
Troubleshooting
Part Names and
Functions
Start Here
and then press
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
20