Printing Label - Epson LabelWorks PX User Manual

5. Printing label

1. Press .
Setting the label auto cut to Off
"Auto cut"
Printing with special print functions
"Utilizing Print Functions"
Checking the print image
1. Press .
The print image scrolls on the entire screen.
When the preview ends, the editing screen reappears.
CAUTION
• Do not insert your fingers into the tape eject slot.
• Do not pull the tape until the printing is completed.
Attention
• "Insert tape" will appear on the display if the tape cartridge
is not loaded or not correctly set.
• Length of the label shown on the display is a guide and
may not match the length of the printed label exactly.
• Label over 16m in length cannot be printed.
MEMO
• To cancel the printing, press .
• Depending on your margin setting or the label type, tape
may be fed and cut before printing.
Top
Start Here
Safety Instructions
Specifications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
14