18
Daisy Chain Monitors
Use this function when displaying DVI-D inputs of a PC in other products.
To use different products connected to each other Connect one end of the signal input cable (DVI-D Cable) to
the DVI-D OUT connector of product 1 and connect the other end to the DVI-D IN connector of other products.
DVI-D Cable
DVI-D Cable
(Max 3 m)
Monitor 1
NOTE
•
For DVI-D, in general, up to 12 monitors can be connected via the DVI-D Out port (at the recommended
resolution) if the signal is stable and there is no cable loss. If you want to connect more than this number of
monitors, we recommended that you use a distributor.
•
When the tile mode is configured via DVI-D cables, only the monitor that receives first signals can play
HDCP-encrypted content. (The DVI-D Out port does not support HDCP.)
•
If the signal cable between the product and your PC is too long, make sure to use the DVI-D booster or DVI-D
optical cable.
•
If input signals are received through the HDMI cable, multiple monitors cannot be connected via the DVI-D
Out port.
Monitor 2
Monitor 3
Monitor 4