Table of Contents
Advertisement
24
Daisy Chain Monitors
To use multiple monitors connected to each other, connect the end of the signal input cable (DP cable) to the DP OUT
connection in one monitor and connect the other end to the DP IN connection of the other monitor.
For the best picture and audio quality, connect the monitor and the external device with the HDMI cable.
* DP Cable: Use a DP cable that is certified to a DP 1.1a (SST) standard or higher.
NOTE
•
In general, up to 100 monitors can be connected via the DP OUT port (at the recommended resolution) if the signal is
stable and there is no cable loss. To connect more than 100 monitors, it is recommended to use a distributor.
•
When the tile mode is configured via HDMI3/DVI-D or DVI-D, HDCP-encrypted content cannot be displayed.
•
If the signal cable connecting the product to your PC is too long, make sure to use a booster or optical cable.
•
HDMI1/2 inputs do not support daisy chaining monitors.
MONITOR 1
MONITOR 2
MONITOR 3
MONITOR 4
Advertisement
Table of Contents
