Read This First - Leading Edge LE-450 Installation & Operation Manual

Read this first

Don't connect the wind turbine in the wrong polarity
Make sure you connect the +ve of the turbine to the +ve of the battery (red to
red) and the -ve of the turbine to the -ve of the battery (black to black). Failing
to do so will damage the equipment and invalidate your warranty.
Don't connect the Diversion Charge Controller in series with the turbine
Always ensure that the turbine and the controller are connected to the battery
separately.
Ensure the blades are fitted in the correct orientation
Consult the diagram on page 9. Blades fitted back to front it will severely
impair power production.
Don't allow the turbine to run without being connected to the battery
Failing to do so will result in the turbine freewheeling causing premature wear
and tear and unnatural blade noise. Failing to do so will invalidate your
warranty.
The Tristar charge controller must be configured for Diversion mode
Failing to do so will invalid your warranty as this can burn out the stator.
Visit our YouTube channel for assistance in wiring up the equipment,
configuring the Tristar charge controllers and more.
Tel: +44 (0)845 652 0396
http://youtube.com/c/LeadingEdgeTurbines
Skyrrid Farm, Pontrilas, Hereford. HR2 0BW. UK www.leturbines.com
Page 3 of 47