Download Print this page

Electromagnetic Fields (Emf) - Philips HP8182/00 User Manual

Salondry control hairdryer 2200w
Hide thumbs Also See for HP8182/00:

Advertisement

This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
For additional protection, we advise you to install a residual current
device (RCD) in the electrical circuit that supplies the bathroom. This
RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
If the appliance overheats, it switches off automatically. Unplug the
appliance and let it cool down for a few minutes. Before you switch
the appliance on again, check the grilles to make sure they are not
blocked by fluff, hair, etc.
Noise Level: Lc = 83 dB [A]

Electromagnetic fields (EMF)

This appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.
Environment
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
2
Dry your hair
1 Connect the plug to a power supply socket.
For precise drying, attach the concentrator (
HP8182/83 only: To enhance volume for curls and bouncy style,
attach the volume diffuser ( ) onto the hairdryer ( ).
) onto the hairdryer ( ).

Advertisement

loading

This manual is also suitable for:

Hp8180/00Hp8183Hp8182Hp8181Hp8180