Rear Speakers Connection - LG SLM4R Owner's Manual

,
Note
y It takes a few seconds (and may take longer)
for the main unit and the subwoofer to
communicate with each other and make
sounds.
y The closer the main unit and the subwoofer,
the better sound quality. It is recommended
to install the main unit and the subwoofer as
close as possible and avoid the cases below.
- There is an obstacle between the main unit
and the subwoofer.
- There is a device using same frequency
with this wireless connection such as
a medical equipment, a microwave or a
wireless LAN device.
- Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m (3.3 ft) to
prevent wireless interference.
1 m
(3.3 ft)
y The wireless subwoofer (or wireless rear
speakers kit) uses the 5.8 GHz band (upper
channels 149 to 165).
So it is recommended to change the wireless
router channel to 5.2 GHz band (lower
channels 32 to 48) to avoid interference with
the wireless router.
* Refer to the wireless router manual for how
to change the wireless router channel.

Rear speakers connection

Connecting the rear speakers
1. Connect the black stripe wire to the terminal
marked - (minus) and the other end to the
terminal marked + (plus).
2. Connect the wireless receiver and the rear
speakers (right, left) with the speaker cables.
Color Position
Grey Rear right
Blue Rear left
Connecting 15
2