GERATEK Burgos DH1206B Instruction Manual page 44

4.3 Replacing of the illuminant
WARNING! Disconnect the appliance from the energy supply.
Do not touch the illuminant with your hands. The sweat on your fingers will
reduce the operating time of your new illuminant. Use a thin cloth or a thin
glove.
1. The illuminant should have cooled down before you remove it.
2. Open the front panel and remove the grease filter (s. fig. below).
3. Pull the old illuminant out of its holder and replace it by a new one of the same
kind and power carefully / 1.5 W max. (s. fig. below).
4. Insert the grease filter and close the front panel.
--- m = 0,45 m
Required minimum distance to surfaces such as pot lids, oven
cloths etc. to avoid any hot parts and risk of fire.
Only use self shielded illuminants to avoid hot parts, risk of fire
and exposure to UV-radiation.
44