GERATEK Burgos DH1206B Instruction Manual page 34

If you have an exhaust air duct to the outside, the extractor hood can be installed
by using an exhaust hose (Diameter of the exhaust hose: s. chapter 6. T
).
DATA
 S. fig. below
2.3.1 Installation steps
1. Find a suitable position for the extractor hood on the wall. Drill three Ø 8 mm
holes in the wall to attach the wall bracket. Insert the enclosed dowels into the
drill holes and fix the bracket to the wall using the screws (ST4*30mm) (s. fig.
below). Ensure that all screws are tightened and that the bracket is anchored in
the wall properly.
1 Drill holes (Ø 8 mm)
2 Dowels
Wall bracket
3
4 Screws (ST4*30 mm)
34
ECHNICAL