Aperture Bracket; Focus Bracket - Panasonic LUMIX DMC-G85 Operating Instructions For Advanced Features

5. 4K Photo and Drive Settings

Aperture Bracket

Recording Mode:
About [More settings] (step
∫
[Image Count]
•
When using burst recording, if you press and hold the shutter button, recording will be
performed until a specified number of pictures are taken.
The available aperture values vary depending on the lens.
Example: when using the interchangeable lens (H-FS12060)
4.0 5.6 8.0
When the initial position is set to F8.0:
1 first picture, 2 second picture, 3 third picture... 7 seventh picture

Focus Bracket

About [More settings] (step
∫
[Step]
[Image Count] ¢
[Sequence]
¢ Not available for burst recording. When using burst recording, if you press and hold the shutter
button, recording will be performed continuously until a specified number of pictures are taken.
[Sequence]: [0/s/r]
・ ・ ・
A Focus: closer
B Focus: farther away
1 first picture, 2 second picture... 5 fifth picture...
•
Pictures taken with Focus Bracket are displayed as a set of group pictures.
•
If you want to merge pictures with commercially available software, we recommend that you
adjust the [Step] and [Image Count] settings while taking pictures and checking them. With a
lens with smaller maximum aperture, you may need a larger number of pictures.
2
in P141)
[3], [5]: Takes a specified number of pictures with different aperture
values within the range based on the initial aperture value.
[ALL]: Takes pictures using all aperture values.
11 16 22
2
in P141)
Sets the interval between focus positions.
•
The distance by which the focus position moves in each step will be
shorter if the initial position is closer to a subject, and conversely if the
initial position is farther from a subject, the distance will be longer.
Sets the number of pictures to be taken.
[0/s/r]: Alternately moves the focus position closer and farther away
within the range centred on the initial position as you take pictures.
[0/r]: Moves the focus position farther away from the initial position as
you take pictures. If you want to merge pictures to create a picture with a
large depth of field by using commercially available software, we
recommend that you use this setting.
・ ・ ・
[Sequence]: [0/r]
143
・ ・ ・
(P182)