Panasonic LUMIX DMC-G85 Operating Instructions For Advanced Features page 121

5. 4K Photo and Drive Settings
•
The camera will perform burst recording of a 4K photo and saves it as a 4K burst file in MP4
format.
•
When [Auto Review] is enabled, the picture selection screen will be displayed automatically. To
continue recording, press the shutter button halfway to display the recording screen.
•
For information on how to select and save pictures from recorded 4K burst files, refer to P125.
•
To reduce camera shake, we recommend that you use a tripod and shutter remote control
(DMW-RSL1: optional)
Battery drainage and camera temperature
•
When the ambient temperature is high or 4K photo recording is performed continuously, the
camera may display [
setting changes to [
down.
•
When [ ] ([4K Pre-Burst]) is set, the battery drains faster and the camera
temperature rises. Select [
Setting Loop Recording ([4K Burst(S/S)])
∫
With [ ] ([4K Burst(S/S)]), you can perform recording while deleting the oldest recorded
data, allowing you to keep on recording while waiting for a photo opportunity without
replacing the card.
•
Once you start recording, the 4K burst file will be recorded and divided approximately every
2 minutes.
Approximately the last 10 minutes (up to approximately 12 minutes) will be saved. The
preceding part will be deleted.
Select the menu. (P51)
> [Rec] > [4K PHOTO] > [Loop Recording]
MENU
Settings: [ON]/[OFF]
•
We recommend that you use a sufficiently charged battery or an AC adaptor (optional).
•
Up to 12 hours of continuous recording is possible.
•
[ ] is displayed during recording.
•
The available recording time and elapsed recording time are not displayed during recording.
•
[Loop Recording] is not possible when there is insufficient free space on the card.
(P309) when using [Light Composition] (P236).
] and recording may stop. (If [
] ([4K Burst]) before recording stops.) Wait until the camera cools
] ([4K Pre-Burst]) only when recording.
] ([4K Pre-Burst]) is selected, the
121