Table of Contents
Advertisement
DLP Projector – User's Manual
PICTURE>>Advanced Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
PICTURE>>Advanced menu. Press the cursor ▲▼ button to move up and down in the
PICTURE>>Advanced menu. Press ◄► to change values for settings.
I
TEM
Noise Reduction
Color Temperature
Gamma
HSG Adjustment
Color Space
White Balance
User Color Temp
Press the cursor ◄► button to adjust the Noise Reduction.
Press the cursor ◄► button to set the Color Temperature.
Press the cursor ◄► button to adjust the gamma correction of the display.
Notes: This function is only available in User 1/ 2/ 3 mode.
Press the ENTER button to enter the HSG Adjustment sub menu.
See HSG Adjustment on page 17.
Press the cursor ◄► button to set the Color Space.
(Range: Auto/ RGB/ SDTV/ HDTV)
Notes: This function is only available when HDMI input source is selected.
Press the ENTER button to enter the White Balance sub menu.
See White Balance on page 17
Press the ENTER button to enter the User Color Temp sub menu.
See User Color Temp on page 18
D
ESCRIPTION
— 16 —
Advertisement
Table of Contents
